Rod-length<100mm

Rod-length<100mm

Unground Rods-Length <100mm

 

Customized service

1.Customize solid tool bar with diameter greater than Φ 20.0mm

2.Rods with the length less than 350mm can be customized.

3.Can provide any standard or special length rod cutting service.

4.Can provide rod chamfering service to improve processing efficiency.

5.Can make various standard grooves.

6.Sandblast services are available to increase the adhesion and durability of the coating.

 

        1555470241(1).jpg               1555470253(1).jpg


Metric and inch dimensions, fixed length, cut to length, 300-330mm 

Unground and ground to h5, h6, chamfered on one side, can be supplied ex stock 




     Unit:mm

Outer diameter(mm)

Length(mm)

size

tolerance

size

tolerance

0.2~2

h5, h6

30~260

+1.0~+8.0

2≤D≤3

+0.1~+0.25

30≤L≤330;extra long:  600, 900

+1.0~+8.0

3<D≤11

+0.2~+0.5

11<D≤15

+0.2~+0.6

15<D≤20

+0.3~+0.7

20<D≤40

+0.4~+0.8

 

Number Example: the outer diameter D is 4.0 mm, and the length L is 50 mm, expressed as the numbered DL04050.

                                                                                                                                                                                                                   Unit:mm


Number

Type number

Diameter

Length

D

Tolerance

L

Tolerance

DL04050

Φ4*50

4.0

+0.2/+0.4

50

+0.5/+1.5

DL06050

Φ6*50

6.0

+0.2/+0.4

50

+0.5/+1.5

DL08060

Φ8*60

8.0

+0.2/+0.4

60

+0.5/+2.5

DL10075

Φ10*75

10.0

+0.2/+0.4

75

+0.5/+2.5

DL10100

Φ10*100

10.0

+0.2/+0.4

100

+0.5/+2.5

DL12075

Φ12*75

12.0

+0.2/+0.4

75

+0.5/+2.5

DL12100

Φ12*100

12.0

+0.2/+0.4

100

+0.5/+2.5

DL14100

Φ14*100

14.0

+0.3/+0.5

100

+0.5/+2.5

DL16100

Φ16*100

16.0

+0.3/+0.5

100

+0.5/+2.5

DL20100

Φ20*100

20.0

+0.3/+0.5

100

+0.5/+2.5